To select factory PE-RT (EVOH) pipes for a greenhouse heating system, start with the system’s design temperature, operating pressure, required flow, and installation layout. Then verify that the pipe’s declared service limits, dimensions, EVOH oxygen-barrier construction, and compatible fittings meet those project requirements. Ask the factory for technical documents and a quotation based on the same specification, so you can compare suppliers on a like-for-like basis rather than on material name alone.
For greenhouse buyers, the right choice depends on more than pipe price. Heating zones, moisture, exposure to sunlight during installation, and the heat source all affect how the pipe should be specified and installed. The steps below provide a practical purchasing framework; final system sizing and operating limits should be confirmed by the project’s heating designer and the pipe manufacturer.
Begin with the heating system, not the catalogue. Record the heat source, design supply and return temperatures, working pressure, required flow, and whether the system is divided into independently controlled zones. These values should come from the project design or equipment specifications rather than assumptions about what PE-RT pipe can withstand.
Also describe the growing environment and pipe route. A pipe installed beneath growing beds, along perimeter walls, or in a floor-heating arrangement may face different mechanical, moisture, and access conditions. If pipe could be exposed to sunlight before or during installation, ask the supplier about storage and UV-protection guidance instead of assuming that the pipe is intended for permanent outdoor exposure.
Give each supplier the same basic information: application, heat source, design temperature, operating pressure, estimated flow, layout, and delivery destination. Include the planned connection method and any fitting or manifold requirements. This makes quotations easier to compare and helps the supplier identify missing technical details before production or shipment.
PE-RT is a polyethylene material used in hot-water piping applications, while EVOH is commonly incorporated as an oxygen-barrier layer in multilayer pipe constructions. In a closed heating circuit, reducing oxygen permeation can help limit oxygen entering the circulating water, which may be relevant when the system includes metal components. However, barrier performance depends on the actual pipe construction and applicable product requirements, so confirm the manufacturer’s documentation rather than relying on the label “EVOH” alone.
Ask whether the pipe is a multilayer product and how the EVOH layer is positioned and protected within the construction. Request the technical datasheet and any applicable test or conformity documents for the exact product offered. Do not assume that two pipes with the same outside diameter or material description have identical barrier performance, service limits, or installation requirements.
Confirm outside diameter, wall thickness, pressure rating, temperature limits, and the standards or specifications the pipe is designed to meet. These details must align with the project designer’s requirements and the fittings, manifolds, and connection tools selected for the system. A supplier’s general product range is not a substitute for confirming the exact item code and specification on the quotation.
For clarity, a buyer might ask a supplier to quote an illustrative option such as 16 × 2 mm or 20 × 2 mm pipe. These dimensions are examples for comparing available products, not a recommendation for a particular greenhouse. The project designer must determine whether a proposed size can deliver the required flow and heat output while keeping pressure loss within the system design.
Temperature and pressure should be considered together. For example, a preliminary project brief might specify a 40°C supply temperature, but that figure alone does not establish a suitable pipe rating or system design. Request the manufacturer’s declared limits for the offered pipe and have the designer check them against the actual operating profile, including any relevant temperature peaks.
Greenhouse heating may use different pipe routes and control zones depending on the building and crop layout. Discuss loop lengths, spacing, connection points, and zoning with the heating designer, then verify that the selected pipe and fittings support the specified installation method. A well-matched pipe specification can still cause procurement or installation problems if the connection system is not compatible.
With competitive price and timely delivery, HTIAN sincerely hope to be your supplier and partner.
Ask for the manufacturer’s instructions on minimum bend radius, cutting, joining, storage, and protection during installation. Confirm whether the proposed fittings are intended for the pipe’s construction and dimensions, and identify any tools needed by the installer. If pipe will be installed where it could be damaged by equipment or later maintenance, include a protection detail in the layout rather than expecting the pipe material alone to prevent damage.
Discuss flushing, pressure testing, and commissioning with the system designer and follow the relevant project requirements and manufacturer instructions. Do not apply a generic test pressure or procedure to every product; the correct method depends on the pipe specification, connections, system design, and applicable requirements. Record the agreed procedure before installation begins.
Request a quotation that identifies the exact product construction, dimensions, pressure and temperature declarations, available colors, packaging, and included documentation. Ask about minimum order quantity, production lead time, shipping method, and how the supplier handles questions about product selection. These commercial details matter for project scheduling, especially when pipe, fittings, and controls need to arrive together.
Before placing an order, check that the technical datasheet and quotation describe the same item. Confirm whether fittings are included or quoted separately, and whether the offered product can be supplied in the required coil or length format. If documentation is unclear, ask for clarification in writing before approving the specification.
One common mistake is choosing by price per meter without checking whether quotations cover the same dimensions, construction, documentation, and accessories. Another is selecting a pipe based only on a nominal temperature figure while overlooking the project’s pressure, flow, and operating profile. Comparing complete, clearly specified offers is more useful than comparing product names alone.
Buyers should also avoid assuming that every PE-RT (EVOH) pipe is suitable for every greenhouse heating layout. The pipe must be evaluated as part of the complete system, including heat source, fittings, controls, installation conditions, and maintenance access. Finally, do not treat a supplier’s general statement as a substitute for product-specific evidence; request documents tied to the exact model being quoted.
As a factory supplier of PE-RT (EVOH) pipes, HTIAN can help B2B buyers review the project information needed for a product inquiry. Share the application, required dimensions, design temperature and pressure, fitting preferences, estimated quantity, and destination market. We can then discuss available product information and clarify which details need confirmation before a commercial offer is prepared.
For a more efficient review, send a project specification or bill of materials if one is available. If key design values are not yet finalized, identify them as pending rather than asking the supplier to guess. This keeps the quotation aligned with the engineering requirements and helps reduce specification changes later in procurement.
The best way to select factory PE-RT (EVOH) pipes for greenhouse heating is to define the system conditions first, verify the exact pipe construction and declared limits, and confirm dimensions and fittings against the heating design. Treat example sizes or temperatures as discussion points, not universal recommendations. A product-specific datasheet and a clear, comparable quotation are essential before purchase.
Your next step is to prepare a project data sheet with operating conditions, layout, required dimensions, estimated quantity, and delivery details. Send it to HTIAN to request product information and a quotation for review with your heating designer. This approach helps you assess technical fit and sourcing requirements before committing to an order.
Contact us to discuss your requirements of Factory PE-RT（EVOH） Pipes. Our experienced sales team can help you identify the options that best suit your needs.